Manual browser: inet6_option_append(3)

Section:
Page:
INET6_OPTION_SPACE(3) Library Functions Manual INET6_OPTION_SPACE(3)

NAME

inet6_option_space, inet6_option_init, inet6_option_append, inet6_option_alloc, inet6_option_next, inet6_option_findIPv6 Hop-by-Hop and Destination Options manipulation

SYNOPSIS

#include <netinet/in.h>

int
inet6_option_space(int nbytes);

int
inet6_option_init(void *bp, struct cmsghdr **cmsgp, int type);

int
inet6_option_append(struct cmsghdr *cmsg, const uint8_t *typep, int multx, int plusy);

uint8_t *
inet6_option_alloc(struct cmsghdr *cmsg, int datalen, int multx, int plusy);

int
inet6_option_next(const struct cmsghdr *cmsg, uint8_t **tptrp);

int
inet6_option_find(const struct cmsghdr *cmsg, uint8_t **tptrp, int type);

DESCRIPTION

Building and parsing the Hop-by-Hop and Destination options is complicated due to alignment constraints, padding and ancillary data manipulation. RFC 2292 defines a set of functions to help the application. The function prototypes for these functions are all in the <netinet/in.h> header.

inet6_option_space

inet6_option_space() returns the number of bytes required to hold an option when it is stored as ancillary data, including the cmsghdr structure at the beginning, and any padding at the end (to make its size a multiple of 8 bytes). The argument is the size of the structure defining the option, which must include any pad bytes at the beginning (the value y in the alignment term “xn + y”), the type byte, the length byte, and the option data.

Note: If multiple options are stored in a single ancillary data object, which is the recommended technique, this function overestimates the amount of space required by the size of N-1 cmsghdr structures, where N is the number of options to be stored in the object. This is of little consequence, since it is assumed that most Hop-by-Hop option headers and Destination option headers carry only one option (appendix B of [RFC 2460]).

inet6_option_init

inet6_option_init() is called once per ancillary data object that will contain either Hop-by-Hop or Destination options. It returns 0 on success or -1 on an error.

bp is a pointer to previously allocated space that will contain the ancillary data object. It must be large enough to contain all the individual options to be added by later calls to inet6_option_append() and inet6_option_alloc().

cmsgp is a pointer to a pointer to a cmsghdr structure. *cmsgp is initialized by this function to point to the cmsghdr structure constructed by this function in the buffer pointed to by bp.

type is either IPV6_HOPOPTS or IPV6_DSTOPTS. This type is stored in the cmsg_type member of the cmsghdr structure pointed to by *cmsgp.

inet6_option_append

This function appends a Hop-by-Hop option or a Destination option into an ancillary data object that has been initialized by inet6_option_init(). This function returns 0 if it succeeds or -1 on an error.

cmsg is a pointer to the cmsghdr structure that must have been initialized by inet6_option_init().

typep is a pointer to the 8-bit option type. It is assumed that this field is immediately followed by the 8-bit option data length field, which is then followed immediately by the option data. The caller initializes these three fields (the type-length-value, or TLV) before calling this function.

The option type must have a value from 2 to 255, inclusive. (0 and 1 are reserved for the Pad1 and PadN options, respectively.)

The option data length must have a value between 0 and 255, inclusive, and is the length of the option data that follows.

multx is the value x in the alignment term “xn + y”. It must have a value of 1, 2, 4, or 8.

plusy is the value y in the alignment term “xn + y”. It must have a value between 0 and 7, inclusive.

inet6_option_alloc

This function appends a Hop-by-Hop option or a Destination option into an ancillary data object that has been initialized by inet6_option_init(). This function returns a pointer to the 8-bit option type field that starts the option on success, or NULL on an error.

The difference between this function and inet6_option_append() is that the latter copies the contents of a previously built option into the ancillary data object while the current function returns a pointer to the space in the data object where the option's TLV must then be built by the caller.

cmsg is a pointer to the cmsghdr structure that must have been initialized by inet6_option_init().

datalen is the value of the option data length byte for this option. This value is required as an argument to allow the function to determine if padding must be appended at the end of the option. (The inet6_option_append() function does not need a data length argument since the option data length must already be stored by the caller.)

multx is the value x in the alignment term “xn + y”. It must have a value of 1, 2, 4, or 8.

plusy is the value y in the alignment term “xn + y”. It must have a value between 0 and 7, inclusive.

inet6_option_next

This function processes the next Hop-by-Hop option or Destination option in an ancillary data object. If another option remains to be processed, the return value of the function is 0 and *tptrp points to the 8-bit option type field (which is followed by the 8-bit option data length, followed by the option data). If no more options remain to be processed, the return value is -1 and *tptrp is NULL. If an error occurs, the return value is -1 and *tptrp is not NULL.

cmsg is a pointer to cmsghdr structure of which cmsg_level equals IPPROTO_IPV6 and cmsg_type equals either IPV6_HOPOPTS or IPV6_DSTOPTS.

tptrp is a pointer to a pointer to an 8-bit byte and *tptrp is used by the function to remember its place in the ancillary data object each time the function is called. The first time this function is called for a given ancillary data object, *tptrp must be set to NULL.

Each time this function returns success, *tptrp points to the 8-bit option type field for the next option to be processed.

inet6_option_find

This function is similar to the previously described inet6_option_next() function, except this function lets the caller specify the option type to be searched for, instead of always returning the next option in the ancillary data object. cmsg is a pointer to cmsghdr structure of which cmsg_level equals IPPROTO_IPV6 and cmsg_type equals either IPV6_HOPOPTS or IPV6_DSTOPTS.

tptrp is a pointer to a pointer to an 8-bit byte and *tptrp is used by the function to remember its place in the ancillary data object each time the function is called. The first time this function is called for a given ancillary data object, *tptrp must be set to NULL. ~ This function starts searching for an option of the specified type beginning after the value of *tptrp. If an option of the specified type is located, this function returns 0 and *tptrp points to the 8- bit option type field for the option of the specified type. If an option of the specified type is not located, the return value is -1 and *tptrp is NULL. If an error occurs, the return value is -1 and *tptrp is not NULL.

EXAMPLES

RFC 2292 gives comprehensive examples in chapter 6.

DIAGNOSTICS

inet6_option_init() and inet6_option_append() return 0 on success or -1 on an error.

inet6_option_alloc() returns NULL on an error.

On errors, inet6_option_next() and inet6_option_find() return -1 setting *tptrp to non NULL value.

SEE ALSO

W. Stevens and M. Thomas, Advanced Sockets API for IPv6, RFC 2292, February 1998.

S. Deering and R. Hinden, Internet Protocol, Version 6 (IPv6) Specification, RFC 2460, December 1998.

STANDARDS

The functions are documented in “Advanced Sockets API for IPv6” (RFC 2292).

HISTORY

The implementation first appeared in KAME advanced networking kit.

BUGS

The text was shamelessly copied from RFC 2292.
December 10, 1999 NetBSD 7.0