Manual browser: kse(4)

Section:
Page:
KSE(4) Kernel Interfaces Manual KSE(4)

NAME

kseMicrel 8842/8841 PCI Ethernet controller driver

SYNOPSIS

kse* at pci? dev ? function ?

DESCRIPTION

The kse driver supports Ethernet interfaces based on the Micrel 8842/8841 PCI Ethernet chips. The 8842 has 2 Ethernet ports which behave as a managed switch to bridge each other. It works like a T-shape connector of Ethernet data flow in which an Ethernet controller sits at the leg of the T. Frames can flow between the two ports while traffic destined for the 8842 reaches the EMAC. The 8841 is a plain 10/100 Ethernet. The kse driver distinguishes and handles them according to the HW model.

AUTHORS

The kse driver was written by Tohru Nishimura.

BUGS

__STRICT_ALIGNMENT case is not written. 8842 media selection keeps “auto” and indicates “up 100baseTX-FX flow” when either of two ports is found link-up. There is no functional provision to see and control the media selection of them this moment. Advanced features like flow volume bound, VLAN tag insertion/removal, QoS DiffServ are not implemented and remain uncontrollable by the kse driver. UDP4CSUM is not very useful since the HW has an implementation error for the case when a large UDP datagram is fragmented into MTU sized frames.
July 6, 2006 NetBSD 7.0