NAME

amrctl — Control utility for AMI MegaRaid controllers

SYNOPSIS

amrctl

stat [-bgv] [-a attempts] [-f device] [-l volno] [-p driveno] [-s busno] [-s busno:driveno] [-t microseconds]

DESCRIPTION

The amrctl queries or controls AMI MegaRaid controllers supported by the amr(4) driver.

Only the stat subcommand is currently implemented, and reports status of the controller. The options for the stat subcommand are as follows:

-a attempts

Number of retries for a command before giving up. Default 5.

-b

Report battery status.

-f device

Device to use. Default to /dev/amr0.

-g

Report global paramters for the controller.

-l volno

Report status of a logical drive.

-p driveno

Report status of a physical drive.

-s busno

Report status of all physical drives on the specified bus.

-s busno:driveno

Report status of the specified physical drive on the specified bus.

-t microseconds

Delay between retries for a command.

-v

Increase verbosity level by one.

SEE ALSO

amr(4)

HISTORY

The amrctl command first appeared in NetBSD 4.0.

AUTHORS

The amrctl command was written by Pierre David <Pierre.David@crc.u-strasbg.fr> and Jung-uk Kim <jkim@FreeBSD.org> for FreeBSD.