HOW TO USE THE FRAMEWORK

Once the object has been initialized, actual sensors may be initialized and attached (see the SENSOR DETAILS section for more information). This is accomplished by the sysmon_envsys_sensor_attach() function, which will attach the envsys_data_t (a sensor) specified as second argument into the sysmon_envsys object specified in the first argument.

Finally, after all sensors have been attached, the device needs to set some required (and optional) members of the sysmon_envsys structure before calling the sysmon_envsys_register() function to register the device.

In case of errors during the initialization, the sysmon_envsys_destroy() function should be used. This detachs all previously attached sensors and deallocates the sysmon_envsys object.

Some sensors can be monitored, and when the sensor value changes an event can be delivered to the powerd(8) daemon. Sensor monitoring can be performed by the sysmon_envsys framework on a polled basis. Alternatively, the sensor's device driver can call the sysmon_envsys_sensor_event() function to deliver the event without waiting for the device to be polled.

The sysmon_envsys_foreach_sensor() function can be used by other parts of the kernel to iterate over all registered sensors. This capability is used by the i386/apm(4) driver to summarize the state of all battery sensors.

Drivers can also call the sysmon_envsys_update_limits() function when it is necessary to reinitialize a sensor's threshhold values. This is used by the acpibat(4) driver when a new battery is inserted.

The sysmon_envsys structure is defined as follows (only the public members are shown):

struct sysmon_envsys { 
	const char 	*sme_name; 
	int		sme_flags; 
	int		sme_class; 
	uint64_t	sme_events_timeout; 
	void 		*sme_cookie; 
	void (*sme_refresh)(struct sysmon_envsys *, envsys_data_t *); 
	void (*sme_set_limits)(struct sysmon_envsys *, envsys_data_t *, 
			       sysmon_envsys_lim_t *, uint32_t *); 
	void (*sme_get_limits)(struct sysmon_envsys *, envsys_data_t *, 
			       sysmon_envsys_lim_t *, uint32_t *); 
};

The members have the following meaning:

sme_class

This specifies the class of the sysmon envsys device. See the DEVICE CLASSES section for more information (OPTIONAL).

sme_name

The name that will be used in the driver (REQUIRED).

sme_flags

Additional flags for the sysmon_envsys device. Currently supporting SME_DISABLE_REFRESH. If enabled, the sme_refresh function callback won't be used to refresh sensor data and the driver will use its own method (OPTIONAL).

sme_events_timeout

This is used to specify the default timeout value (in seconds) that will be used to check for critical events if any monitoring flag was set (OPTIONAL).

If the driver wants to refresh sensors data via the sysmon_envsys framework, the following members may be specified:

sme_cookie

Typically a pointer to the device struct (also called “softc”). This may be used in the sme_refresh, sme_get_limits, or sme_set_limits function callbacks.

sme_refresh

Pointer to a function that will be used to refresh sensor data in the device. This can be used to set the state and other properties of the sensor depending on the data returned by the driver. NOTE: You don't have to refresh all sensors, only the sensor specified by the edata->sensor index. If this member is not specified, the device driver will be totally responsible for all updates of this sensor; the sysmon_envsys framework will not be able to update the sensor value.

sme_get_limits

Pointer to a function that will be used to obtain from the driver the initial limits (or thresholds) used when monitoring a sensor's value. (See the SENSOR DETAILS section for more information.) If this member is not specified, the ENVSYS_FMONLIMITS flag will be ignored, and limit monitoring will not occur until appropriate limits are enabled from userland via envstat(8).

sme_set_limits

Pointer to a function that alerts the device driver whenever monitoring limits (or thresholds) are updated by the user. Setting this function allows the device driver to reprogram hardware limits (if provided by the device) when the user-specificied limits are updated, and gives the driver direct control over setting the sensor's state based on hardware status.

The sme_set_limits callback can be invoked with the third argument (a pointer to the new limits) set to a NULL pointer. Device drivers must recognize this as a request to restore the sensor limits to their original, boot-time values.

If the sme_set_limits member is not specified, the device driver is not informed of changes to the sensor's limit values, and the sysmon_envsys framework performs all limit checks in software.

Note that it's not necessary to refresh the sensors data before the driver is registered, only do it if you need the data in your driver to check for a specific condition.

The timeout value for the monitoring events on a device may be changed via the ENVSYS_SETDICTIONARY ioctl(2) or the envstat(8) command.

To unregister a driver previously registered with the sysmon_envsys framework, the sysmon_envsys_unregister() function must be used. If there were monitoring events registered for the driver, they all will be destroyed before the device is unregistered and its sensors are detached. Finally the sysmon_envsys object will be freed, so there's no need to call sysmon_envsys_destroy().

DEVICE CLASSES

SME_CLASS_ACADAPTER

This class is for devices that want to act as an AC adapter. The device writer must ensure that at least there is a sensor with units of ENVSYS_INDICATOR. This will be used to report its current state (on/off).

SME_CLASS_BATTERY

This class is for devices that want to act as a Battery. The device writer must ensure that at least there are two sensors with units of ENVSYS_BATTERY_CAPACITY and ENVSYS_BATTERY_CHARGE.

These two sensors are used to ensure that the battery device can send a low-power event to the powerd(8) daemon (if running) when all battery devices are in a critical state. (The critical state occurs when a battery is not currently charging and its charge state is low or critical.) When the low-power condition is met, an event is sent to the powerd(8) daemon (if running), which will shutdown the system gracefully by executing the /etc/powerd/scripts/sensor_battery script.

If powerd(8) is not running, the system will be powered off via the cpu_reboot(9) call with the RB_POWERDOWN flag.

NOTE: If a SME_CLASS_ACADAPTER or SME_CLASS_BATTERY class device doesn't have the sensors required, the low-power event will never be sent, and the graceful shutdown won't be possible.

SENSOR DETAILS

typedef struct envsys_data { 
	uint32_t	units; 
	uint32_t	state; 
	uint32_t	flags; 
	uint32_t	rpms; 
	int32_t		rfact; 
	int32_t		value_cur; 
	int32_t		value_max; 
	int32_t		value_min; 
	int32_t		value_avg; 
	sysmon_envsys_lim_t limits; 
	int		upropset; 
	char		desc[ENVSYS_DESCLEN]; 
} envsys_data_t;

The members for the envsys_data_t structure have the following meaning:

units

Used to set the units type.

state

Used to set the current state.

flags

Used to set additional flags. Among other uses, if one or more of the ENVSYS_FMONxxx flags are set, automatic sensor monitoring will be enabled. Periodically, the sensor's value will be checked and if certain conditions are met, an event will be sent to the powerd(8) daemon. NOTE that limits (or thresholds) can be set at any time to enable monitoring that the sensor's value remains within those limits.

rpms

Used to set the nominal RPM value for fan sensors.

rfact

Used to set the rfact value for voltage sensors.

value_cur

Used to set the current value.

value_max

Used to set the maximum value.

value_min

Used to set the minimum value.

value_avg

Used to set the average value.

limits

Structure used to contain the sensor's alarm thresholds.

upropset

Used to keep track of which sensor properties are set.

desc

Used to set the description string. NOTE that the description string must be unique in a device, and sensors with duplicate or empty description will simply be ignored.

Users of this framework must take care about the following points:

• The desc member needs to have a valid description, unique in a device and non empty to be valid.
• The units type must be valid. The following units are defined:

  ENVSYS_STEMP

  For temperature sensors, in microkelvins.

  ENVSYS_SFANRPM

  For fan sensors.

  ENVSYS_SVOLTS_AC

  For AC Voltage.

  ENVSYS_SVOLTS_DC

  For DC Voltage.

  ENVSYS_SOHMS

  For Ohms.

  ENVSYS_SWATTS

  For Watts.

  ENVSYS_SAMPS

  For Ampere.

  ENVSYS_SWATTHOUR

  For Watts hour.

  ENVSYS_SAMPHOUR

  For Ampere hour.

  ENVSYS_INDICATOR

  For sensors that only want a boolean type.

  ENVSYS_INTEGER

  For sensors that only want an integer type.

  ENVSYS_DRIVE

  For drive sensors.

  ENVSYS_BATTERY_CAPACITY

  For Battery device classes. This sensor unit uses the ENVSYS_BATTERY_CAPACITY_* values in value_cur to report its current capacity to userland. Mandatory if sme_class is set to SME_CLASS_BATTERY.

  ENVSYS_BATTERY_CHARGE

  For Battery device classes. This sensor is equivalent to the Indicator type, it's a boolean. Use it to specify in what state is the Battery state: true if the battery is currently charging or false otherwise. Mandatory if sme_class is set to SME_CLASS_BATTERY.

• When initializing or refreshing the sensor, the state member should be set to a known state (otherwise it will be in unknown state). Possible values:

  ENVSYS_SVALID

  Sets the sensor to a valid state.

  ENVSYS_SINVALID

  Sets the sensor to an invalid state.

  ENVSYS_SCRITICAL

  Sets the sensor to a critical state.

  ENVSYS_SCRITUNDER

  Sets the sensor to a critical under state.

  ENVSYS_SCRITOVER

  Sets the sensor to a critical over state.

  ENVSYS_SWARNUNDER

  Sets the sensor to a warning under state.

  ENVSYS_SWARNOVER

  Sets the sensor to a warning over state.

• The flags member accepts one or more of the following flags:

  ENVSYS_FCHANGERFACT

  Marks the sensor with ability to change the rfact value on the fly (in voltage sensors). The rfact member must be used in the correct place of the code that retrieves and converts the value of the sensor.

  ENVSYS_FPERCENT

  This uses the value_cur and value_max members to make a percentage. Both values must be enabled and have data.

  ENVSYS_FVALID_MAX

  Marks the value_max value as valid.

  ENVSYS_FVALID_MIN

  Marks the value_min value as valid.

  ENVSYS_FVALID_AVG

  Marks the value_avg value as valid.

  ENVSYS_FMONCRITICAL

  Enables and registers a new event to monitor a critical state.

  ENVSYS_FMONLIMITS

  Enables and registers a new event to monitor a sensor's value crossing limits or thresholds.

  ENVSYS_FMONSTCHANGED

  Enables and registers a new event to monitor battery capacity or drive state sensors. The flag is not effective if the units member is not ENVSYS_DRIVE or ENVSYS_BATTERY_CAPACITY.

  ENVSYS_FMONNOTSUPP

  Disallows setting of limits (or thresholds) via the ENVSYS_SETDICTIONARY ioctl(2). This flag only disables setting the limits from userland. It has no effect on monitoring flags set by the driver.

  ENVSYS_FHAS_ENTROPY

  Allows this sensor to provide entropy for rnd(4).

  If the driver has to use any of the value_max, value_min, or value_avg members, they should be marked as valid with the appropriate flag.

• If units is set to ENVSYS_DRIVE, the value_cur member must be set to one of the following predefined states:

  ENVSYS_DRIVE_EMPTY

  Drive state is unknown.

  ENVSYS_DRIVE_READY

  Drive is ready.

  ENVSYS_DRIVE_POWERUP

  Drive is powering up.

  ENVSYS_DRIVE_ONLINE

  Drive is online.

  ENVSYS_DRIVE_OFFLINE

  Drive is offline.

  ENVSYS_DRIVE_IDLE

  Drive is idle.

  ENVSYS_DRIVE_ACTIVE

  Drive is active.

  ENVSYS_DRIVE_BUILD

  Drive is building.

  ENVSYS_DRIVE_REBUILD

  Drive is rebuilding.

  ENVSYS_DRIVE_POWERDOWN

  Drive is powering down.

  ENVSYS_DRIVE_FAIL

  Drive has failed.

  ENVSYS_DRIVE_PFAIL

  Drive has been degraded.

  ENVSYS_DRIVE_MIGRATING

  Drive is migrating.

  ENVSYS_DRIVE_CHECK

  Drive is checking its state.

• If units is set to ENVSYS_BATTERY_CAPACITY, the value_cur member must be set to one of the following predefined capacity states:

  ENVSYS_BATTERY_CAPACITY_NORMAL

  Battery charge is normal.

  ENVSYS_BATTERY_CAPACITY_CRITICAL

  Battery charge is critical.

  ENVSYS_BATTERY_CAPACITY_LOW

  Battery charge is low.

  ENVSYS_BATTERY_CAPACITY_WARNING

  Battery charge is on or below the warning capacity.

• The envsys(4) framework expects to have the values converted to a unit that can be converted to another one easily. That means the user should convert the value returned by the driver to the appropriate unit. For example voltage sensors to mV, temperature sensors to uK, Watts to mW, Ampere to mA, etc.

  The following types shouldn't need any conversion: ENVSYS_BATTERY_CAPACITY, ENVSYS_BATTERY_CHARGE, ENVSYS_INDICATOR, ENVSYS_INTEGER, and ENVSYS_DRIVE.

  PLEASE NOTE THAT YOU MUST AVOID USING FLOATING POINT OPERATIONS IN KERNEL WHEN CONVERTING THE DATA RETURNED BY THE DRIVER TO THE APPROPRIATE UNIT, IT'S NOT ALLOWED.

HOW TO ENABLE AUTOMATIC MONITORING IN SENSORS

int 
mydriver_initialize_sensors(struct mysoftc *sc) 
{ 
	... 
	/* sensor is initialized with a valid state */ 
	sc->sc_sensor[0].state = ENVSYS_SVALID; 
 
	/* 
	 * the monitor member must be true to enable 
	 * automatic monitoring. 
	 */ 
	sc->sc_sensor[0].monitor = true; 
 
	/* and now we specify the type of the monitoring event */ 
	sc->sc_sensor[0].flags |= ENVSYS_FMONCRITICAL; 
	... 
} 
 
int 
mydriver_refresh(struct sysmon_envsys *sme, envsys_data_t *edata) 
{ 
	struct mysoftc *sc = sme->sme_cookie; 
 
	/* we get current data from the driver */ 
	edata->value_cur = sc->sc_getdata(); 
 
	/* 
	 * if value is too high, mark the sensor in 
	 * critical state. 
	 */ 
	if (edata->value_cur > MYDRIVER_SENSOR0_HIWAT) { 
		edata->state = ENVSYS_SCRITICAL; 
		/* a critical event will be sent now automatically */ 
	} else { 
		/* 
		 * if value is within the limits, and we came from 
		 * a critical state make sure to change sensor's state 
		 * to valid. 
		 */ 
		edata->state = ENVSYS_SVALID; 
	} 
	... 
}