NAME

etcupdate — update the configuration and startup files in /etc

SYNOPSIS

etcupdate

[-ahlv] [-d destdir] [-p pager] [-s {srcdir | tgzdir | tgzfile}] [-t temproot] [-w width]

DESCRIPTION

etcupdate is a tool that lets the administrator update the configuration and startup files in /etc (and some other directories like /dev, /root and /var) without having to manually check and modify every file. The administrator should run this script after performing an operating system update (e.g. after running make build in /usr/src or after extracting new binary distribution files) to update to the latest configuration and startup files.

etcupdate compares the new configuration files against the currently installed files. The user is given the option of installing, merging or deleting each modified or missing file. The user can also view the differences between the files. By default, it shows the differences in the unified diff format. The default format can be toggled to show the differences in unified, context, or side by side formats or an user-defined command may be used to view differences. (And if wdiff is installed, it can also show differences on a word by word basis.)

etcupdate also detects if the user installs certain special files and performs corresponding tasks like remaking device nodes or rebuilding a database from the aliases(5) file. Finally, etcupdate runs postinstall(8) to check the results.

etcupdate needs a clean set of new configuration files to compare the existing files against. These files, called the “reference files” in this manual, may be derived from either a source or binary distribution of NetBSD.

If the user is updating from sources (which is the default mode), etcupdate will first create a copy of the reference files by running make distribution in /usr/src/etc, installing the files to a so-called temproot. (See usage of the -s srcdir and -t temproot options later in this manual page.) Although this is the default mode, it is not recommended (see the “BUGS” section).

Instead of using sources, it is recommended that the user should extract one or more binary distribution sets in a special location and use those as the reference files (see usage of the -s tgzdir option later in this manual page), or specify one or more binary distribution sets directly (see usage of the -s tgzfile option later in this manual page).

The following options are available:

-a

etcupdate can automatically update files which have not been modified locally. The -a flag instructs etcupdate to store MD5 checksums in /var/etcupdate and use these checksums to determine if there have been any local modifications.

-d destdir

Use destdir instead of / as the top of the file system hierarchy to be updated. For example, destdir/etc will be used instead of /etc.

-h

Prints a help text.

-l

Automatically skip files with unchanged RCS IDs. This has the effect of leaving alone files that have been altered locally but which have not been changed in the reference files. Since this works using RCS IDs, files without RCS IDs will not be skipped even if only modified locally. This flag may be used together with the -a flag described above.

-p pager

The pager to use when displaying files. By default this is more(1) but it can be changed either with this option or by defining the PAGER variable.

-s {srcdir | tgzdir | tgzfile}

The location of the reference files, or the NetBSD source files used to create the reference files. This may be specified in one of three ways:

-t temproot

Specifies the location of the temproot directory. This directory will be used for a temporary copy of the reference files created by running “make distribution” in the source directory specified by -s srcdir, or a temporary copy of the reference files extracted from the binary sets specified by -s tgzfile, or a temporary copy of the reference files from the directory specified by -s tempdir. By default this is /tmp/temproot but can be changed either with this option or the TEMPROOT environment variable.

-v

Makes etcupdate verbose about its actions.

-w width

Sets screen width used during interactive merge. By default this is the number of columns stty(1) reports but it can be changed either with this option or by defining the WIDTH variable. This is useful for xterm(1) users with wider shell windows.

ENVIRONMENT

FILES

The environment variables can also be defined in the following configuration files. The user's personal configuration file settings override the global settings.

/etc/etcupdate.conf

~/.etcupdaterc

EXAMPLES

You have just upgraded your NetBSD host from 3.0 to 4.0 and now it's time to update the configuration files as well. To update the configuration files from the sources (if you have the /usr/src/etc directory):

etcupdate

The default location of the source files is /usr/src but this may be overridden with the -s srcdir command line argument:

etcupdate -s /some/where/src

To update the configuration files from binary distribution sets do something like this:

etcupdate -s /some/where/etc.tgz -s /some/where/xetc.tgz

or like this:

mkdir /tmp/temproot

cd /tmp/temproot

tar -xpzf /some/where/etc.tgz

tar -xpzf /some/where/xetc.tgz

etcupdate -s /tmp/temproot

You have modified only few files in the /etc directory so you would like install most of the updates without being asked. To automatically update the unmodified configuration files:

etcupdate -a

To get a better idea what's going on, use the -v flag:

etcupdate -v

HISTORY

The etcupdate command appeared in NetBSD 1.6.

In NetBSD 4.0, the -s tgzfile option was added, the -b tempdir option was converted to -s tgzdir, and the -s srcdir option was changed to refer to the top of the source directory tree rather than to the etc subdirectory.

In NetBSD 5.0, the ability to specify multiple colon-separated files with a single -s option was deprecated, and options deprecated in NetBSD 4.0 were removed.

In NetBSD 7.0, the ability to specify multiple colon-separated files with a single -s option was removed (multiple -s options must be used instead), and the -d destdir option was added.

AUTHORS

The script was written by Martti Kuparinen <martti@NetBSD.org> and improved by several other NetBSD users.

The idea for this script (including code fragments, variable names etc.) came from the FreeBSD mergemaster (by Douglas Barton). Unlike the FreeBSD mergemaster, this does not use CVS version tags by default to compare if the files need to be updated. Files are compared with cmp(1) as this is more reliable and the only way if the version numbers are the same even though the files are different.

BUGS

If a source directory is specified via the “-s srcdir” option (or if the /usr/src directory is used by default), then etcupdate will run “make distribution” in the etc subdirectory of the source directory, but it will not use the same options or environment variables that would be used during a full build of the operating system. For this reason, use of the “-s srcdir” option is not recommended, and use of the “-s tgzdir” or “-s tgzfile” options is recommended.

Manual browser: etcupdate(8)